With pinball making a big renewal across the nation, Gentle Giant wishes to make sure that these traditional, lovely devices remain damage-free while being transported. Oh, and we want the individuals moving them to be safe, too.
At first glimpse, pinball makers can appear daunting to move due to the fact that of their size, fragility, and weight. Luckily, our experienced Giants have a couple of tricks up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox
Most of modern pinballs (made in the last 20 years approximately) have a hinge system which allows the headbox to be folded down. Early pinball devices had their headboxes bolted on, utilizing either two or four bolts. All Electro-Mechanical pinballs utilize this system, along with the early Solid State makers.
Later devices have hinges and utilize a latching system to keep the headbox upright. There may likewise be 2 bolts inside as added security, in case the lock is broken or accidentally un-latched.
For Electro-Mechanical pinball devices, you have to remove the headbox rear access panel to get to the bolts and plugs inside. Typically this panel has a lock on it to keep it in location, but in time the secret might have been lost. Frequently, there is a screw keeping this panel in location.
As soon as inside, eliminate the bolts and disconnect the large ports that have circuitry decreasing into the machine. You might wish to label these ports to put them back in the ideal area, but they ought to be various sizes, making it difficult to plug back incorrectly.
You can now eliminate the headbox entirely, or fold the headbox down onto the playfield glass. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in place.
Early Solid State Pinballs
For early Strong State Pinballs, you will require to remove the back glass. There is a lock located on the headbox in among 3 locations: the left-hand side at the top, right-hand side at the top or on top of the headbox in the center.
When opened, remove the back glass by lifting it up utilizing the lift channel (at the bottom of the glass), then pull it out from the bottom.
Then, open the back box lamp panel by lifting the lock situated on either the left-hand side or right-hand side. The panel can now swing out to you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise up the light panel in order to swing it open.
Now that you are within, you can remove the bolts, and any plugs that have wires going down into the device. You might want to label these plugs to put them back in the best area. You might not have to remove the plugs, as the electrical wiring must be long enough to permit the headbox to be folded down.
At this moment, you can lock up the lamp panel and replace the back glass.
Modern Strong State Pinballs
For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Using the supplied key, turn the lock 90 ° counter-clockwise.
For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the maker. This is a simple setup and requires no tools.
You're done if you can now fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in location.
If you can not fold the head box down, then you have to get in. There is a lock located at the top of the back glass in the center. Utilize the provided secret to read more unlock, and remove the back glass by lifting it up from the bottom, and after that pulling it out from the bottom.
Next, you will require to get rid of the display screen panel. You can do this by lifting it up and out. And finally, open the lamp panel. There will be a lock situated on either the left-hand or right-hand side. (Some more recent Williams and Bally Check This Out pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).
Remove the two bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Removing the Legs.
Pinball Machine legs are held in place by eight bolts. They will be either 5/8 inch or 9/16 inch heads. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be gotten rid of, and the legs will come off.
But these captive nuts and threaded plates can be damaged, and making use of extra nuts may have been required. If this holds true, you will have to open up the front door of the pinball, slide out the playfield glass, and lift up the playfield.
With the front door (coin door) open, move the lock down bar latch across and remove the lock down bar. Then slide out the playfield glass, and put in a safe place. Next, raise the playfield by putting your hand where the ball drains, and lift the playfield up.
You ought to now have access to any nuts that might have been utilized. When any nuts have actually been eliminated, change the playfield glass and lock down bar, and lock the front door.
Make certain to mark or keep in mind which legs are for the front and back, as they will be changed in a different way to match.
Filling the Pinball.
You are now all set to transport your pinball machine. Before you load it, make sure you remove the pinballs so they don't bounce around during transport.
If you are moving the pinball utilizing a van or SUV, it might be simpler to eliminate the legs just prior to packing the device. Grab a buddy to help and have one of you supporting the pinball, while the other removes the front legs.
Make sure you strap the pinball in, as you do not want it moving if you have to stop unexpectedly!
For Electro-Mechanical pinball makers, you require to get rid of the headbox rear gain access to panel to acquire access to the bolts and plugs within. (Some more recent Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).
If you are moving the pinball using a van or SUV, it may be easier to get rid of the legs simply prior to filling the maker. Get a pal to have and help one of how to move a pinball machine you supporting the pinball, while the other removes the front legs.